Fasep RGU300.ECO, Instruction Booklet

Page: 10 / 21

12
Fort he front bead, recommended method is applying with roller.
Inner heel and foot wear reduction system described above generally apply to tractor tires.
After seperating the outer bead of tire from rim, tire gets out from the rim, with the help of moving part.
OPERATION AND USE
2)-
After separating the inner and outer heel
from the edge, the foot arrangement is first
coated on the outer heel.
Lever mounted in the top of the foot, and the
tire, so that it can be pushed outwards.
Tires rotated clockwise, and slowly outward leg
assembly is towed
(Figure 17).
This process is continued until the heel totally
separated from the outer rim.
The same procedure is applied in the inner
heel, and completely separated from the tire rim
is provided.
(MOUNTAGE )
The tire is fitted on the rim facing the clamp. Inner
and outer heel of mature oiling or soaping
beautiful.
Removal - insert foot is placed between the rim
and the heel. The installation process is
performed by the turn of the tire clockwise.
When beads fit to the rim completely, assembly
finishes.
Do
not inflate mature while it is on the machine,
after installation of the machine should be
removed from the tire, and pump elsewhere.

Wheel is connected to the mirror. on the upper part of the rim, pliers (clamp) mount (Fig.18)

For heavy tires, the process of connecting to the machine should be performed by two people.
Fig.17
Fig.18