Fasep RGU300.ECO, Instruction Booklet

Page: 9 / 21

11
OPERATION AND USE
( DEMONTAGE )

The air of the tires must be taken before it is inserted into the machine. Empty the air in the
tire completely attached to the machine, and after starting the removal.

Connect the rim to the mirror.
Both sides of tire and roller are lubricated
and soaped.

Roller set between rim and tire.

Pressuring to tire with roller to break the
bead, with turning the machine.

The same procedure is done on the other
side of the tire (Figure 15).
There are several methods of separating the tire from the rim;
1)-
Inner heel, after leaving the wheel to the
active counter outside enabled.
Simultaneous turning of the tire, with roller
and the tire is further squeezed.
Remove both heels slowly outwards from the
rim (Fig.16).

When roller the tire, outward force applied, and when the heel sits on the inner cheek
of the rim and when the rotation of the tire on the rim prevents the clamp attached to
the rim and continue working.
Fig.15
Fig.16
CLAUSE 9