Fasep RGU300.ECO, Instruction Booklet

Page: 4 / 21

6
WARNING !
It is absolutely prohibited to carry out tyre inflation procedures while the wheel is still on the machine!
At least two people are required for the movement of particularly heavy wheels!
WHEEL LOCKING SYSTEM
The self-centering chuck operates by means of a high pressure hydraulic circuit adjustable from 20 to 110 bar. The handle
is turned and the pressure read on the manometer. Standart working pressure is 110 bar, but for weak or particularly thin
rim it is necessary to reduce this pressure .
INTRODUCTION
This manual is designed for service personnel, skilled in the use of these machines and the staff who makes the routine maintenance of the
machine.
Before every operation of this machine, must be read the operating instructions.
This guide;

SAFETY OF EMPLOYEES

It contains information about MACHINE SAFETY.
PRESERVATION OF USER MANUAL
Users and maintenance personnel must keep a place in reach of this manual at the time it is needed.
Handling, transport, Start, Settings, testing, additional maintenance and repair should be performed by the manufacturer authorized specialists.
The manufacturer is not responsible for problems and accidents That Occur in the event of incorrect use of the work done by unskilled people and
machines Mentioned above.
This manual is intended for the machine operators and maintenance personnel, for safe and correct use.
SAFETY

THIS MACHINE IS DESIGNED ONLY FOR 14
ıı
– 30
ıı
RIMS .

THIS MACHINE SHOULD BE USED ONLY FOR TYRE REPLACEMENT.

PAY ATTENTION TO THE WARNING SIGNS ON THE MACHINE.

If the operator hears unusual noises or vibrations or something that may be dangerous , he must immediately
press the emergency button and switch off the main switch and check the section “Malfuctions causes and
possible remedies” in the instructions manual.If the problem is still call the service.

Wear protection glasses and gloves during the operation.

Stand straigth during operation.

Work in an insulated and clean area.

Switch off the main switch when there is no electricity.

Work in the safe distance.

The machine must be fixed onto smooth place.
PACKING, TRANSPORT, STORAGE
Packaging, picking up, extraction from shipping and packing must be carried out by experienced personnel at tire assembly
process, and who know the contents of this brochure.
PACKING
Tyre assembly machines, on wooden packaging and boxes were wrapped with stretch film.
LIFTING AND HANDLING
The Pallets Must Be Moved Wıth A Lıft Truck.The Equıpment Chosen Must Be Suıtable For Safe Lıftıng And Movıng,
Bearıng In Mınd The Dımensıons , Weıght , Barycentre , Justs And Fragıle Parts Not To Be Damaged.
STORAGE
Packed machine must be kept in a closed and protected place - between 40% C and 10% C. The machine should be protected
from direct sunlight. Pull the plug if the machine is not used for a long time.
OPENING CRATES
When The Crates Arrıve, Check That The Machıne Has Not Been Damaged Durıng Transport And That All The Lısted
Parts Are Present. The Crates Must Be Opened Usıng All Possıble Precautıonary Measures To Avoıd Damagıng The
Machıne Or Its Parts. Make Sure That Parts Do Not Fall From The Crate Durıng Openıng.
DISPOSAL OF CRATES
Wood pallets and wrapped in stretch film can be reused. Although not harmful Keep out of the reach of children.
CLAUSE 4