Original notice – User’s manual
13
5.
INSTALLATION
Positioning
The place of installation must be chosen in accordance with the applicable safety
standards.
The installation is provided on vans whose dimensions are within the application
limits which make the device usable, as indicated in the technical characteristics
and explained in the following paragraphs.
The floor of the van must not be disjoint, its surface must be regular and equipped
with a wooden protection.
The working conditions must comply with the following parameters:
Ambient temperature between 0°C and 55°C.
Relative humidity from 30% to 95%.
Absence of potentially explosive sources (eg: gas tanks, chemical deposits,
etc.).
Sufficient ventilation.
Good overall cleanliness.
WARNING
Never place the battery or fuel tank within 30 cm of the exhaust pipe or any
heat source.
Fixation
The device must be attached to the van floor. It is advisable to contact us to avoid
possible damage to the mechanical / electrical / hydraulic parts under the floor.
The standard fixing points are shown in the sketches below.
