36
PERLA HP - ISSUE 02
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
Command 53 Sugar dose setting:
Espresso vending machines: this command is used for setting the quantity of normal sugar, common to all
the selections, expressed in tenths of a second. By default the normal sugar dose is 13 tenths equal to
approx 6.5 g. When making a selection the user can use the + and – buttons located on the front panel to
vary the quantity of dispensed sugar with respect to the average dose. Next the system requires you to
match the dose defined in the sugar preselection to the number of indicator lights appearing on the display.
Default value 2 (indicator lights ) and can vary from 1 to 5.
Command 54 Presence of optional kits:
1 :
defines the presence or not of the autonomous kit. If set at 1 it indicates that there is a canister of water
and associated pump, if it is not possible to connect the distributor to the water mains. Default value 0.
2 :
defines whether or not the cup photocell is present. If present = 1, not present = 0; Default value = 0
3 :
cup drop delay, the parameter can be set from 0 to 50 tenths of a second. Default value 0. If parameter 2
is enabled, the request for attempt to drop the second cup appears (1=function enabled, 0=function not
enabled; default = 0). Next follows a request to set the wait time for the second cup to drop: from 0 to 50
tenths of a second, default time 0 tenths of a second. If the request for second attempt to drop a cup is
enabled, a request will follow to enable “OUT OF ORDER” due to the second cup not having dropped,
1=enabled, 0=not enabled. If 0=not enabled, in the event of the 2 cups not having dropped, the selection in
progress will be disabled and the vending machine will remain in service.
4 :
if the machine does not envisage the use of a spoon dispenser as default (e.g. instant models), the spoon
dispenser option is proposed. Value to set at 1 only if a spoon dispenser is installed later.
5 :
(espresso models): setting the espresso unit prewash time, from 0 minutes (prewash disabled), to 60
minutes. The default value is 30 min.
6 :
(espresso models): prewash with coffee beans powder = 1, or with water = 0. Once the time set in
parameter four has elapsed, if a short espresso coffee selection is made the machine firstly executes an
espresso unit wash in order to heat the circuit. The time restarts from zero each time the espresso unit is
activated by one of the selections. When the machine is switched on, the first short espresso coffee is
always preceded by the prewash if this function is enabled.
7 :
(espresso models): defines the quantity of water required for the espresso unit prewash. The default
value is set at 5 cc and can vary from 5 to 50 cc. If 0 = the parameter is disabled.
8 :
enables the prewashing of the mixer that receives the milk. If 1 = enabled , if 0 = disabled.
Command 55 Setting the espresso coffee instant grinding:
If the command is set at 1, the default value, the coffee is ground for the delivery in progress, whereas, if it is
set at 0, the coffee is ground for the next delivery.
Command 56 Activation of the prompt change function:
If the command is set at 1, before executing the selection the vending machine collects the credit. If it is set
at zero, which is the default value, the credit is collected once the selection has been dispensed. This
function is useful in the master/slave connection as the slave machine becomes ready immediately for a new
selection. Whereas the credit which is deducted immediately after the selection on the “Master” machine, is
not returned to the customer in the event of an uncompleted sale.
Command 57 Setting cup column stopping delay and dispenser spouts retracting delay:
The command regulates the delay for the stopping action of the cup column, which ensures an accurate
alignment between the tube and the cup outlet opening. The delay is counted from the moment the cup
presence microswitch switches over. Default value: 12 tenths of a second, but it can vary between 5 and 30.
Next the machine requires you to set the delay on the cup movement. The default value is 11 tenths of a
second, and can vary between 0 and 30.
Next set the standby time for the cup to remain in the dispensing position until the selection has finished
dripping. The default value is 50 tenths of a second but can vary between 0 and 70.
