32
PERLA HP - ISSUE 02
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
10.2.1 ACCESS TO THE SUBMENUS
Command 02 Calls submenu for setting the clock & daily timers:
Key in 02 and press the ENTER pushbutton to enter the submenu for setting the clock and daily timers.
Alarm 00 will appear on the display. Follow the method described in the specific section to display and alter
the parameters.
Command 03 Recall of price setting submenu (you see also Command 69):
Enter 03 and press
ENTER
to recall the submenu for price setting of each selection , and '
Selection
number 0
' appears on the display.
Enter the number of the selection for which you wish to display or edit the price and press
ENTER
. The text
'
Price......
' appears on the display, then enter the new price value and press
ENTER
once again to memorise
it, or press the
ESC
key to return to the main menu without saving the changes.
To set the price of selection 6 at € 1.20 proceed as follows:
•
Programming mode, Command 0 appears on the display.
•
Type 03 and press ENTER, Selection number 0 appears on the display
•
Type 6 and press ENTER, the current price of Price No. appears on the display.
•
Set the value 120 and press ENTER.
As an alternative, by programming the price as per selection 99, the prices for all sections of the dispenser
are matched to the set value.
Programming the value of the full prices changes the value of the corresponding
discounted prices by making them the same. Consequently, when selling with different
prices, that is with a discount, firstly program the full price then the discounted prices
and never vice versa or only one of the two.
N.B.: With SPIRALI SLAVE connection enabled
(see command 49)
, once the settings for the MASTER
machine have been completed, access is gained to the setting mode for the same parameters relevant to
the SLAVE machine by simply pressing the A (ESC) button.
Alternatively, prices can be programmed by drawer: selection 91 implies that all the selections in the first
drawer from the top have the same set price. Selection 92 = 2nd drawer; 93 = 3rd drawer; 94 = 4th drawer;
95 = 5th drawer; 96 = 6th drawer; 97 = 7th drawer. If you program a price in selection 99, the prices for all
the selections in the vending machine will be
converted to the same set price.
Command 04 Calls submenu for setting discounted prices:
This command has the same functions as command 03, but it shows the discounted prices.
In the MDB mode, these prices refer to key or credit card purchases or purchases made within a certain time
band, or both (see description Command 61). Furthermore, if the MDB cashless system allows the product
to be selected from two different price tables, this command is used to set the prices relative to table 2. The
prices relative to table 1 are set at Command 03.
As an alternative, by programming the price as per selection 99, the prices for all sections of the dispenser
are matched to the set value.
N.B.: With SPIRALI SLAVE connection enabled
(see command 49)
, once the settings for the MASTER
machine have been completed, access is gained to the setting mode for the same parameters relevant to
the SLAVE machine by simply pressing the A (ESC) button.
Alternatively, prices can be programmed by drawer: selection 91 implies that all the selections in the first
drawer from the top have the same set price. Selection 92 = 2nd drawer; 93 = 3rd drawer; 94 = 4th drawer;
95 = 5th drawer; 96 = 6th drawer; 97 = 7th drawer. If you program a price in selection 99, the prices for all
the selections in the vending machine will be
converted to the same set price.
