UNPACKING
Remove the DVP5000 unit from the shipping
container and examine it for any signs of ship-
ping damage or missing items (check inventory
list below). All shipping materials should be
saved if the unit is to be moved or returned for
service.
INSTALLATION
The DVP5000 processor is designed to be
either placed on a table or rack mounted. If the
rack mounting installation kit is to be used, the
rack mount ears are mounted by using 3
screws. It will be necessary to support the rear
of the unit if it will be shipped in the rack by
using rack support rails supplied by the rack
manufacturer.
VENTILATION
The unit is cooled by a fan located on the top
panel. Air is drawn from vents along the sides
and bottom of the chassis.
These vents must
not be blocked.
When rack mounted, a mini-
mum of 1.75" (1 rack unit height) of free space
is required above and below the unit to allow
for proper cooling. A forced air fan should be
added to the rack installation if power amps are
located in the same air space.
REAR PANEL I/O
Inputs
11. HDTV Input (BNC)
1
1. S-Video (4 Pin DIN)
1
2. Composite Video (RCA)
1
3. Component Video
Interlaced or Progressive(RCA)
1
4. HDTV/Computer (D15M)
10. AC Power
Outputs
1
5. RGBHVC, YUV or YPrPb (D15F)
1
6. RGBHVC, YUV or YPrPb(BNC)
Control
1
7. Screen Trigger (12V , 3.5mm , 2or 3pin)
1
8. Remote IR sensor (5V, 3.5mm, 3pin)
1
9. RS232 Port (D9F)
4
INSTALLATION
Inventory
1-DVP5000
1- Batteries
1-Owner’s Manual
2- Rack Mount Ears
1- Power Cord
1- Warranty Card
1 2
3
4
5
6
7 8
9
10
11
