NOTE: Do not leave the 4:3 image with a
Wide Angle screen on for long periods of
time. This can cause permanent image burn-
in with CRT projectors. Image burn-in is not
covered by Faroudja’s warranty.
FRONT PANEL CONTROLS
1.
Power/Standby:
Press to turn the unit On
(Green) or to Standby (Red)
2.
Infrared Sensor window
3.
Function - / + :
Cycles up or down through
the available control Functions
4.
Value - / +
: Adjusts the levels or changes
settings of the Function selected.
5.
Factory Preset:
Recalls all settings to
Factory levels. This also functions as an
Enter button for functions such as storing
presets.
6.
LCD Display:
Provides readout of all
Functions and Values.
Note: When Functions are accessed via the
front panel controls no On-Screen-
Displays are visible.
OPERATION
There are three ways to control the unit; from the
front panel, from the remote control and via
RS232. Controlling from the front panel requires
cycling through the available functions.
Controlling from the remote can be either by
cycling through the functions or by direct access.
When the unit first powers up it will go through
a complete Self-Test procedure. The following
list of control options then become available.
The list is in the order of appearance when
pressing the + button on the front panel.
Input Format
Composite
S-Video
Component
HDTV 480P/HDTV 720P
HDTV 1080i/INVALID HDTV INPUT
HDTV-Pass (RGB, YUV, YPrPb)*
Note: The DVP5000 will auto-detect if the
Component input is interlaced or progres-
sive and if the input is NTSC or PAL.
* The HDTV Pass-Through will list what type of
output was selected in the Setup menu (RGB,
YPrPb, YUV). The Pass-Through input format
must
match
the output listed.
Input Aspect Ratio
Anamorphic
Letterbox
4:3
(Default)
Note: Aspect Ratio control with 4:3 screens
is only available at scan rates of 720p or
higher. Aspect Ratio control is not available
for the HDTV input.
Brightness
0-255, Factory 128
Contrast
0-255, Factory 128
9
OPERATION
1
2
3
4
5
6
