21
Revision date: 05.13.20 112534
OPERATIONAL AND MAINTENANCE INFORMATION
Clean filters ensure proper flow. Filters should also be cleaned after cleaning
reservoir to remove sediment. When a reduced flow rate or drop in pressure is
noticed, follow these steps to clean filters and filter housings.
ATTENTION:
SYSTEM SHOWN DIFFERS FROM ACTUAL SYSTEM.
FILTER ASSEMBLY IS THE SAME. STEPS FOR CLEANING THE
FILTER ARE THE SAME.
Clean the Filter Screen and Housing
1. Turn off pump. Open valve on
the filter to drain the supply
line and filter.
2. Grip the filter housing and the
main supply line and unscrew
the housing. Do not apply
force to the filter or the supply
line fittings. Hold these steady
when disassembling the filter.
3. Remove the screen from the
housing. Using clean water,
rinse the housing and the
screen.
4. Insert the screen back into
the housing, reassemble the
filter, and
close the valve.
5. Turn on pump and check flow
to each bucket.
6. Check filter for leaks.
Flow
Flow
