GROWSPAN
™
GOTHIC PREMIUM GREENHOUSES
18
106205_06_07_08
Revision date: 06.28.18
INSTALL FRAMING FOR ACCESSORIES (OPTIONAL)
Complete these steps to install the accessory framing:
1. Read the note regarding the installation of optional
accessories at the beginning of the end wall installation
section.
2. Based on the installation requirements and precautions
of the accessory, choose a location in the end wall
where you can mount the accessory, and cut two (2)
1.5" x 1.5" frame tubes to the required length. Consult
the End Wall Diagram.
3. Attach these horizontal frame tubes between the
vertical frame tubes of the end wall (at the required
height determined by the installation instructions
included with that accessory) using QH1330 brackets.
Dashed lines show where additional frame tubes are
installed. If you are not installing any accessories the
accessory framing is not needed.
INSTALL THE END WALL FRAME (continued)
INSTALL END WALL FRAMING (BACK)
The end framing for the back of the greenhouse is
assembled in the same way as the front end wall. Consult
the End Wall Diagrams as needed to install the frame.
Space below is reserved for customer notes.
