![background image](http://html.mh-extra.com/html/farmtek/growers-supply-115106f/growers-supply-115106f_manual_545428009.webp)
9
Revision date: 02.17.16
ASSEMBLE SCREEN FRAME—continued
9. Install upper and lower horizontal and vertical front frame sections and
secure using 1/4" fasteners. Tighten to remove excess play at each
connection.
Do not fully tighten at this time.
10. Install remaining upper and lower diagonal supports as shown. See
dashed lines and diagrams for strut locations.
11. Using a large carpenter's square, square corners and tighten all 1/4"
fasteners.
NOTE:
Ensure frame is square before fasteners are tightened.
12. Using the original fasteners (Step 2), reinstall wire guard for fan.
13. Apply bead of sealant around all u-channel attached to shroud to seal
any gaps that may be present.
Allow to dry before installing screen.
14. Install insect screen as shown in the next section. Choose the procedure
for the screen kit purchased: 11507F (36" x 36") or 11508F (48" x 48").
Do not cut screen using the wrong procedure.
1b
Square
Diagonal Brace
Assemble 115107F (36" x 36") and 115108F (48" x 48") Screen Kit