![background image](http://html.mh-extra.com/html/farmtek/growers-supply-115106f/growers-supply-115106f_manual_545428008.webp)
88
Revision date: 02.17.16
ASSEMBLE SCREEN FRAME—continued
5. Secure by driving a Tek screw through u-channel and shroud in the
marked locations.
Do not secure ends of u-channel at this time.
6. Repeat steps to secure all remaining sections of u-channel to the
perimeter of fan shroud.
7. With a drill and 5/16" bit, drill all mounting holes through fan shroud using
the pre-drilled holes in u-channel ends as a guide.
8. Install the upper and lower side frame sections and struts. Connect using
the diagonal strut and 1/4" fasteners.
See connection details on main
diagram page for specific kit.
NOTE:
Do not fully tighten the 1/4" fasteners at this time. Tighten only
enough to remove excess play in each connection.
Drill 5/16" hole through
shroud at each end of
each u-channel section
at all four corners.
1b
Assemble 115107F (36" x 36") and 115108F (48" x 48") Screen Kit
x
x
Marks