25
Revision date: 09.21.18
113542
psi
0
40
20
60
80
10
0
On-Floor Drain Channel
9
ASSEMBLE AND INSTALL THE ON-FLOOR DRAIN CHANNEL
The on-floor GT70 drain channel is designed to deliver drain water away from
the fodder system to a holding tank, drain, or other predetermined destination.
NOTE:
The on-floor drain channel helps direct drain water away from the fodder
system to a predetermined location. Additional materials may be needed to
achieve the desired results. Contact your sales representative to purchase
additional channels, splices, and end caps if needed.
Complete these steps to assemble the drain channel.
1. Gather the parts shown at the right.
2. Using pvc primer and pvc cement, assemble the on-floor drain channel.
3. After the cement has set, move the drain channel into position under the
downspout.
111127
111128
111129
111003Z060
WR6990
NOTE:
Once the gutter is cemented,
it cannot be disassembled without
damaging the components.
End Cap
Splice
Assemble and Install On-Floor Drain Channel