CLEARVIEW
™
PANELS
Visit
www.ClearSpan.com
for additional products and customer assistance.
REQUIRED TOOLS
The following list identifies the tools and equipment needed
to assemble the panel. Additional tools and supports may
be needed depending on the location, and application.
Tape measure or measuring device
Variable speed drill or screwdriver
Drill bits
3/8'' Nut Setter or 3/8'' socket
Scissors
Gloves
Box cutter or utility knife
Ladders, work platforms, and other machinery for lifting
designed to work safely at the height of the panel.
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin.
Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide for
clarification, or contact Customer Service.
NOTE:
At this time, you do not need to open the plastic
bags containing smaller parts such as fasteners or
washers.
•
•
•
•
•
•
•
•
1.
2.
OVERVIEW
This section is an overview of the process for assembling
your ClearView™ panel. For details, please see each
section.
Locate the required parts for each assembly procedure.
Prepare the frame.
Hang the panel using screw hooks.
Hang the panel using screws and washers.
Read the care and maintenance information.
1.
2.
3.
4.
5.
FA4482B
Tek Screw
CC4595
Snugger Tie-Down
FAMF01
Fender Washer
FAX115
Screw Hook
The following graphics and photos will help you identify
parts and accessories available for the ClearView™ panel.
FAS8. FAS11,
FAS12, FAS13,
FAS14
Stainless Steel
Deck Screws
FAME16
Stainless Steel
Washer
NOTICE:
Accessories are sold
separately. Ask your sales associate for
details.
PICTORIAL PARTS GUIDE
