BRUTE
™
FEED BUNKS
6
Revision date: 09.03.08
4
Gather the two (2) PolyMax
®
end panels and place one at each end on the inside of the frame.
Align a 23" length of aluminum strap across the top of the end segment. Using Tek screws, secure the
aluminum strap and end panel to the top tube as shown below. Place one Tek screw at each end and one
in the middle.
Secure the other sides of the end panel with Tek screws as shown in the diagram below.
Repeat for the other end panel.
Aluminum strap
End segments will
have a 2" x 2" notch
cut out of each
corner to fit around
the square tubes.
Tek screw
locations
Aluminum strap
