![background image](http://html.mh-extra.com/html/farmtek/brute/brute_assembly-instructions-manual_545403005.webp)
5
BRUTE
™
FEED BUNKS
Revision date: 09.03.08
2
Gather four (4) 15" tubes. Attach to the corner brackets as shown below.
3
Gather two (2) 96" tubes and two (2) 24" tubes. Assemble as shown below using corner brackets and Tek
screws.
IMPORTANT:
The 96" tubes will span the entire length of the feed bunk. When attaching the corner
brackets to tube lengths, verify that the 96" tubes slide completely into the corner.
ATTENTION:
Install Tek
screws in these locations.
One on each side of corner
NOTE:
See steps 1 and 2
for Tek screw locations