3
Revision date: 08.20.09
CARTS AND WAGONS
Parts List and Tools Required
To better align the wagon, do not fully tighten
the nuts and bolts until the entire wagon is
assembled.
1. Remove tongue bolt, lock nut, tongue
washers, and spacer from the center of
the front axle.
2. Align the hole in the center of the tongue
attachment with the hole in the center of
the front axle. Insert spacer in between
the tongue attachment and the axle
frame.
3. Secure using tongue bolt, tongue
washers, small washer and lock nut.
4. Slide one (1) wheel, large washer, and
cotter pin in that order onto each end of
the axle.
1
FRONT AND REAR AXLE ASSEMBLY
Washer and cotter pin are used on the
outside of the wheel.
Install the wheel with
the valve stem to the outside.
Wheels (4)
Cotter Pins (4)
Large Washers (4)
Socket/Wrench Set
Pliers
Flat Screwdriver
Back Axle (1)
Front Axle (1)
Large Washer
View as
seen from
the bottom.
Cotter Pin
