4
Revision date: 08.20.09
CARTS AND WAGONS
Parts List and Tools Required
2
CONNECT AXLES AND ATTACH TONGUE
12mm Locknuts (3)
Socket/Wrench Set
Pliers
Flat Screwdriver
12x70mm Bolts (2)
12x80mm Bolt (1)
Frame Adaptor (1)
Tongue (1)
Cotter Key (1)
Hitch Pin (1)
12mm Washers (3)
NOTE
:
Hardware may ship attached to parts.
1. Position front and back axles as shown and insert the
frame adaptor into the slots in both axles. Align the
holes and secure using 12x70mm bolts, washers and
lock nuts. See diagram A.
2. Align the holes on the tongue with the holes in
the tongue attachment. Secure in place using a
12x80mm bolt, washer, and lock nut. See diagram B.
3. Insert the hitch pin through the end of the tongue and
secure with cotter key.
4. Tighten all connections.
Periodically check
connections to make sure they are tight and secure.
5. Check tire pressure and adjust as needed.
Do not
inflate tires more than 35 P.S.I.
Tongue
Attachment
Front Axle
Frame Adaptor
Back Axle
Slide
tongue into
groove and
secure as
shown.
12x70mm bolts,
washers,and
lock nuts
Tongue
A
B
