background image

User Manual

www.talentaudio.com

www.talentaudio.com

Model: BL63

7. Troubleshooting 

Following are a few common problems that may occur during operation. Here 

are some suggestions for easy troubleshooting:

A. The fixture does not work, no light 

1.  Check the connection of power and mains fuse.

2.  Measure the mains voltage on the main connector.

B. Not responding to DMX controller

1.  DMX LED should be on. If not, check DMX connectors and cables to verify they are  

  linked properly.

2.  If the DMX LED is on and the channel does not respond, check the address settings  

  and DMX polarity.

3.  If you have intermittent DMX signal problems,check the cable and fixture 

 

  connectors for proper function.

4.  Try to use another DMX controller for comparison.  

5.  Check if the DMX cables are run near or alongside high voltage cables that  

  may cause interference to the DMX interface circuit. 

C. Some fixtures don’t respond to the controller 

1.  You may have a break in the DMX cabling. Check the LED for the response  

  of the master/ slave mode signal.

2.  Wrong DMX address in the fixture. Set the proper address.

D. No response to sound

1.  Make sure the fixture does not receive DMX signal.

2.  Check microphone to see if it is good by tapping the microphone.

8. Fixture Cleaning 

Clean with soft cloth using a very mild household detergent. Always dry the 

parts carefully. 

WARRANTY

Talent is dedicated to providing their customers with quality product. As such, all Talent products are 

warranted free from defects in material and workmanship for a period of One Year from the date of purchase. 

Warranty registration is not required, but purchasers are asked to retain their receipt as proof of purchase. 

Warranty does not apply to misuse, abuse, neglect, accident, improper use, etc. For complete customer 

satisfaction, Talent resellers are asked to act as agents for the purpose of handling warranty claims. 

Please return your Talent product to your place of purchase prepaid. Many Talent resellers require a return 

authorization (also known as an RA or RMA). Please contact your Talent reseller for more details.

Summary of Contents for BL63

Page 1: ...MX cabling Check the LED for the response of the master slave mode signal 2 Wrong DMX address in the fixture Set the proper address D No response to sound 1 Make sure the fixture does not receive DMX signal 2 Check microphone to see if it is good by tapping the microphone 8 Fixture Cleaning Clean with soft cloth using a very mild household detergent Always dry the parts carefully WARRANTY Talent i...

Page 2: ...se the fixture to rain or moisture The housing must be replaced if it is visibly damaged Do not look directly at the LED light beam while the fixture is on Do not connect in series more than 30 units Use another circuit to supply additional fixtures CAUTION There are no user serviceable parts inside the fixture Do not open the housing or attempt any repairs yourself In the unlikely situation your ...

Page 3: ...trol the others to give an automatic sound activated synchronized light show The first fixture s DMX input cable will have nothing connected to it and the other fixtures will be set in slave mode automatically Their DMX input cables connect to the previous fixture s DMX output cable daisy chain Any fixture can act as a Master or as a Slave 3 Installation The unit should be mounted via the holes on...

Page 4: ... disconnected 4 At the last fixture the DMX cable should be terminated to reduce signal errors Solder a 120 ohm 1 4W resistor between Pin 2 DMX and Pin 3 DMX into a 3 pin XLR plug and connect it to the last fixture s DMX output 5 Eachlightingfixturemusthaveitsaddresssettoreceivedatasentbythecontroller The address number is between 0 511 usually 0 1 are equal to 1 6 3 pin XLR connectors are more co...

Reviews: