Farmi PROFI CH27 DMR, Operation, Maintenance And Spare Parts Manual

Page: 8 / 106

CH27 DMR
8
1 2
1. Safety area for the operator. Feeder control on
this side. Safety stop on both sides (1 ja 2).
2. Safety area for the operator.
DESCRIPTION OF WORKSITES
A worksite with a level and firm surface should
be used when chipping. Clear any small brush
and stones from the worksite. The material to be
chipped should be as clean as possible - make
every effort to keep soil or stones from entering
the chipper.
Avoid chipping in close proximity to power
lines. The distance from power lines must
always be at least 5 metres.
Reserve an adequate amount of working space
for the chipper and transport equipment.
Do not store fuelwood stacks near objects
which can cause damage to the chipper if they
should enter it (e.g. saws, log tongs, etc.).
If the chips are to be discharged directly into
chip storage, ensure that the discharge hole is
set at a suitable height.