CH27 DMR
56
!
DANGER!
CHIPPING
During chipping, please
observe the following
safety instructions:
1. Always read the operating and safety
instructions of the used feed unit before
operating the chipper.
2. Chipper with manual feed: Never work in
front of the feed hopper. Stand on the left
side of the feed hopper when feeding.
During operation, the danger zone must
be safeguarded to prevent unauthorized
people from entering the danger zone If ne-
cessary, operation must be interrupted.
3. The operator of a chipper with manual
feed must wear the following personal
protective equipment: safety helmet, ear
protection, protective goggles, cut resis-
tant safety boots and required protective
clothing.
4. Never hold any part of the body into the feed
hopper or into another part of the chipper
with the machine running.
5. Before feeding in the material to be chipped,
ensure that the wood fed into the chipper is
free from metal or soil (such as nails, stones,
etc.).
6. Do not use the chipper at temperatures
below -20 °C. This is to avoid damage due
to brittleness – especially of the knives –
caused by the cold.
7. Avoid chipping wood that is frozen solid;
otherwise, excessive stress will be exerted
on the chipper and self-feeding will be
impaired.
8. FIRE HAZARD! Always keep adequate fire-
fighting equipment on hand when using
the chipper. Regularly check the surface
temperature of the chipper. If the chipper
suddenly heats up abnormally, stop the
chipper and determine the cause of over-
heating. Regularly, check the temperatu-
re of the bearings. Pay special attention to
careful maintenance, and keep the chipper
free from dust. If the chipper starts smoking,
pour water into the feed hopper.
Summary of Contents for PROFI CH27 DMR
