Farmi PROFI CH27 DMR, Operation, Maintenance And Spare Parts Manual

Page: 59 / 106

CH27 DMR
59
STORAGE INSTRUCTIONS
UNCOUPLING THE CHIPPER FROM THE TRAC-
TOR
1. For coupling or uncoupling the chipper,
always turn off the tractor and apply the
parking brake before entering the area bet-
ween the chipper and tractor.
2. Before disconnecting the hydraulic hoses
from tractor, ensure that the hydraulic sys-
tem is depressurized.
3. When uncoupling the universal shaft from
the tractor, support the shaft using the hook
provided for it on the chipper. This prevents
the shaft from falling to the ground.
STORAGE OF THE CHIPPER
1. Clean the chipper after use and before
putting in storage.
2. Store the chipper in an area where there are
no people. Do not let children play near the
chipper!
3. Before uncoupling the chipper from the
tractor, park it on level and hard ground.
Take appropriate measures to prevent the
chipper from moving or falling. If neces-
sary, use boards or beams for additional
support.
4. If the chipper is to be stored for a long
period, lubricate the knives e.g. with petro-
leum jelly.
5. Take appropriate measures to keep the
water drainage holes on the lower chamber
open.
AFTER STORAGE AND BEFORE USE
1. Ensure that the feeder device is empty.
2. Ensure that there is a sufficient amount of oil
in the hydraulic unit.
MAINTENANCE
MEASURES TO TAKE BEFORE
Before beginning maintenance and repair
1. Place the chipper onto level and hard
ground and make sure it cannot tip.
2. Turn off the tractor and disconnect the PTO
drive shaft.
3. Disconnect the hydraulic hoses from the
tractor.
4. Always lock the rotor before adjusting or
changing the knives.
5. Always wear protective gloves when
handling knives.
6. Familiarize yourself with the machine-
specific maintenance and repair instruc-
tions.
In case of doubt, please contact the manufac-
turer.
WARNING!
!