39
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
13
ENVIRONMENTAL
PROTECTION
Regularly check the tightness of the hydraulic system.
Preventively replace or repair hydraulic hoses, possibly further parts of the hydraulic system showing
signs of damage, before oil leaks occur.
Check the condition of hydraulic hoses and perform their timely replacement. The service life of hydraulic
hoses includes the time, when they were stored.
Handle oils and greases according to valid waste laws and regulations
.
14
MACHINE
DISPOSAL
AFTER
SERVICE
LIFE
EXPIRITY
The operator must secure during machine disposal that steel parts and parts, in which hydraulic oil or
lubricating grease moves are differentiated.
Steel parts must be cut by the operator while observing safety regulations and handed over to the
secondary raw material collection point. He must proceed with other parts according to valid laws about
waste
.
15
SERVICING
AND
WARRANTY
CONDITIONS
15.1
SERVICING
Servicing is secured by the dealer after consulting with the manufacturer, possibly directly by the
manufacturer. Spare parts then using the sales network by individual sellers in the entire country. Use
only the spare parts according to the spare parts catalogue officially issued by the manufacturer.
15.2
WARRANTY
15.2.1
The manufacturer provides a warranty of 24 months for these machine parts: main frame, axle, and
machine tow bar. For other parts of the machine, the manufacturer provides a warranty of 12 months.
The warranty is provided from the date of sale of the new machine to the end user (consumer).
15.2.2
The warranty applies to hidden defects that will show in the warranty period with proper use of the
machine and while fulfilling the conditions stated in the operating manual.
15.2.3
The warranty does not apply to wearable spare parts, i.e. regular mechanical wear and tear of
replaceable parts of the working sections (shares, edges, etc.).
15.2.4
The warranty does not apply to indirect consequences of possible damage, such as service life
decrease etc.
15.2.5
The warranty is bound to the machine and is not void upon an owner change.
15.2.6
The warranty is limited to the disassembly and assembly, possibly replacement or repair of the
defective part. The decision, whether to replace or repair the defective part, is up to the contractual
workshop of Farmet.
15.2.7
During the warranty period, only the authorised servicing technician of the manufacturer may perform
repairs or other interventions into the machine. In the opposite case, the warranty will not be
acknowledged. This provision does not apply to the replacement of wearable spare parts (see point
15.2.3).
15.2.8
The warranty is conditioned by using the genuine spare parts of the manufacturer.
Prepared by: Technical Department, Farmet a.s., Jirinkova 276, Ceska Skalice 552 03,
On 24 May 2021, changes reserved.
