Farmet TRITON 600 PS, Operating Manual

Page: 32 / 40

32
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
SETTING THE WORKING DEPTH OF THE FRONT DISC SECTION

The working depth of the disc section depends on the set depth of the chisels.

The setting range for the front disc section is 330 mm so that it is possible to cover the range of the
working depth of the discs from 50 to 120 mm for all the working depths of the chisel section.

The working depth difference between the disc and chisel sections is set hydraulically from the tractor
cabin using the
GREEN circuit.

The position of the disc section can be seen on the indicator with number 1-3.

The indicator position can be adjusted by turning the strap with the scale.
SETTING OF DISC SECTION TO BE IN PARALLEL WITH THE GROUND

Perform the setting using ratchet nuts with removable control lever.

The setting does not change when the working depth changes.

The English standard nuts have to be set evenly, the length of all nuts has to be identical for operation.

The section is parallel to the ground when the length of the English standard nut is L = 550 mm.