30
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
SETTING THE WORKING DEPTH OF THE CHISELS
The working depth of the chisels is set by adjusting the machine frame height above the ground.
In the front of the machine, the depth is set on the drawbar.
In the rear of the machine, the depth is set on the supporting roller.
The machine frame must be parallel to the ground.
The adjustment is done by changing the number of the space washers on the piston-rods.
The table states the individual working positions and the number of space washers needed to achieve
the required machine depth.
The stated working depths of the individual positions are for information only. They might differ
according to the individual soil conditions. It is possible to add or remove a required number of space
washers as needed
.
The number of the space washers must be the same on all piston-rods
!!!
