Manual KOMPAKTOMAT K400NS
17
Picture 10
–
Adjusting the leveller behind shares
Picture 11
–
Height of the leveller behind shares
6.
MAINTENANCE AND REPAIRS OF THE MACHINE
Observe the safety instructions and regulations for maintenance and treatment.
Check that all screws and other assembly points are tight before each use of the machine and whenever
needed.
Regularly check the wear and tear of the working parts of the machine. The quality of work decreases with
the worn working parts.
Lubricate all indicated lubrication places according to Chapter 6.1.
Replace shares according to Chapter 6.2.
Adjusting, cleaning and lubricating the machine may only be performed when the machine is standing still,
i.e. the machine is stopped and is not working.
When adjusting, cleaning, maintaining and repairing the machine, secure the folding and rotary parts of the
machine that could put the operator in danger by fall or other movement.
When repairing the unfolded machine parts, use a suitable support device leaning against labelled places or
appropriate places.
For attaching the machine when manipulating it with the use of lifting equipment, use only places marked by
stick-
on labels with the symbol of a chain “
”.
If there is a defect or damage on the machine, immediately turn off the tractor engine and secure the engine
from turning on, secure the set and the machine against movement
then you can remove the defect.
When repairing the machine, use only original spare parts, suitable tools and protective equipment.
Order original spare parts according to the Spare Parts Catalogue.
If you have to weld during the repair and have the machine attached to the tractor at the same time, the
supply cables have to be disconnected from the alternator and accumulator.
Keep the machine clean.
Do not use a high-pressure cleaner or direct water jet for cleaning hydraulic rollers (piston-rods) and
bearings. The bearings and seals are not waterproof under high pressure.
6.1
LUBRICATION PLAN FOR THE MACHINE
Regular lubrication of lubricating places increases the usable life of the nodes and the machine. Perform
lubrication according to the “Lubrication Plan”
.
When lubricating the bearings of the rollers, observe caution so that you do not damage the bearings. When
lubricating the bearings of the rollers, turn the roller around so that the lubricant spreads evenly.
Lubricate the nodes until clean lubricant is coming out of them. Then wipe the lubricant off.
Leveller setting chain
behind the shares
lišty
Eye on the
bearing frame
Leveller
behind shares
Securing chain
segment
V
