Farmet FALCON SW, Operating Manual, Page: 71 / 80

Manual
FALCON SW
71
│
80
-
The third step is the calibration test:
Picture 55 – Calibration test
Procedure – place a bag that have been weighed below the sowing mechanism. Blind the opening which will
prevent the seeds from falling into the pipeline. Then press the key to start filling the bag with seeds.
Picture 56
– Filling the bag
Calibration factor
Rape 5 g/rev.
Cereals 300 g/rev.
Legumes 300 g/rev.
Pea
400 g/rev.
By pressing this key you start
filling the bag with seeds (hold
until there is a weighable
amount in the bag)
Set what speed
you will move
during sowing
Doser 1
Use this key to
start the
calibration test
Set double the
desired dose
I ask 50 to set
100 kg / ha
Setting the
approximate
calibration
factor depends
on the seed type
and its dose
Fill up the feeder
turnstile