Manual
FALCON SW
22
│
80
4.3.
CONTROLLING HYDRAULICS
Procedure for unfolding and folding the machine
Press the key for controlling hydraulics (A)
Then press the key for unfolding/folding (B) and unfold the machine
Confirm the task after the machine has unfolded (C)
Picture 13 – Procedure for folding/unfolding the machine
Controlling the rear sowing section – controlled from the tractor using the blue hydraulic circuit
when the application is activated (also possible to control when the display unit is off). Then in
combination with markers.
Controlling the front sowing section – controlled from the tractor using the yellow hydraulic circuit
when the application is activated. For transport, it is required to close the ball valve located on the
pole of the machine to prevent undesirable movement of the front section during transport.
4.3.1
Controlling markers
Markers are controlled by pressing the key for markers control as shown in the picture below. On the
following screen choose which marker or function you want to activate.
If no marker is selected before the run, the machine will work without them.
Picture 14 – Controlling markers
C
B
A
Controlling of markers
Function marsh