Farm King 1600, Operator And Parts Manual

Page: 19 / 108

DO NOT open the lid of the
eductor while in operation as
splashing of chemical may occur.
CAUTION
CAUTION
AGRICULTURAL CHEMICALS
CAN BE DANGEROUS.
IMPROPER SELECTION OR
USE CAN INJURE PERSONS,
ANIMALS, PLANTS, SOILS
OR OTHER PROPERTY.
TO AVOID INJURY
1. SELECT THE RIGHT
CHEMICAL FOR THE JOB.
2. HANDLE AND APPLY IT
WITH CARE. FOLLOW
INSTRUCTIONS ISSUED
BY THE CHEMICAL
MANUFACTURER.
002438
Fill Solution Tank, Utilizing Optional Eductor
Load the solution tank using the optional eductor via
the following steps:
1. Close all valves.
2. Remove solution quick fill cap and connect load
hose.
3. Open solution quick fill valve and solution tank
main valve.
4. Open valve on loading reservoir (i.e. nurse tank)
5. Fill eductor with desired amount of chemical to be
pulled into the solution tank. CLOSE Eductor Lid.
6. Start the remote transfer pump.
7. Once there is a steady flow rate from the nurse
tank to the solution tank, open the eductor valve
and close the solution quick fill valve. Once there
is a steady flow rate again, open the eductor tank
valve for 15-30 seconds.
8. Close the eductor tank valve and verify the chemi-
cal has been completely removed from the educ-
tor tank. Repeat steps 7 and 8 if chemical remains
in the eductor tank.
9. Run remote transfer pump until the desired
amount of solution is transferred into the sprayer.
10. Close valves on the loading reservoir.
11. Close solution quick fill valve and the eductor
valve on the sprayer.
12. Remove load line and replace cap on sprayer
quick fill.
Operation Instructions - Section B
Solution Quick Fill Connection
Eductor Lid
Left Side View Eductor
(Optional)
Solution Quick Fill and Eductor
Plumbing (Optional)
Left Under Frame View
Eductor Inlet Valve
(Closed Position)
Solution Quick Fill
(Closed Position)
Eductor Outlet Valve
(Closed Position)
Eductor Tank Valve
(Closed Position)
19