7
5.
Press the key.
6.
The text “Offset: 0ºC” will be displayed. Press and keys to display the offset you
wish to apply.
(Note:
this offset can be positive or negative, and is added to the temperature value
obtained by the probe. If you 5ºC, a probe reading of 15ºC will be displayed as
20ºC, conversely, if you select 5ºC, a probe reading of 15ºC will be displayed as 10ºC).
7.
Once you are satisfied that the displayed value is the one you wish to apply, press
the key. After a few seconds the corrected temperature will be displayed and the
heater will use it to turn on or off.
HOW TO RESET A HEATER:
NOTE:
If you reset the EG heater, all of the customised programmes that you may have
stored in the memory will be deleted, as well as time and day of the week settings. Any
programs that have been configured by the user will be replaced by a standard program.
1.
Press the key.
2.
Press the key once, Which will make the “ ► “ replaced indicator position itself in
front of “Config”.
3.
Press the key.
4.
Press the key four times, which will make the “ ► “ indicator position itself in front
of “Reset”.
5.
Press the key.
6.
The text “Sure: No” will be displayed. Press or to change the text to “Sure: Yes”,
7.
Press . The Heater will now be reset.
HOW TO CHANGE THE LANGUAGE:
1.
Press the key.
2.
Press the key once, this will make the “ ► “ indicator to position in front of
“Configuration”.
3.
Press the key.
4.
Press the key three times, the “ ► “ indicator will position in front of “languages”.
5.
Press the key.
6.
Press the & keys to select the desired languages ( English, Spanish, Italian, French,
Portuguese or German)
7.
Press the key. The heater will memorise the chosen language.
8.
Keep the key pressed to go back to the previous menu.
9.
Repeat step 8 again to go back to the main menu.
