14
CARE AND MAINTAINANCE:
Under no circumstances should the appliance be covered!.
Let the
“DO NOT COVER”
warning on the upper face of the radiator serve the user as a
constant reminder. Air must be freely able to enter into contact with all heater surfaces.
Use pH neutral detergents to clean the radiator.
POSITION:
The ideal position for the
heater is to fit it away from
any non-insulated wall. If
necessary, the surface’s
insulation should be
increased.
Heaters should not be fitted
within the safety protection
area limit in bathrooms
that is stipulated in each
country´s regulations and
the minimum distances
shown on the figure below
should be respected.
Beside a wall
100% yield
With a shelf or sill
above 90% yield
In a recess
85% yield
FITTING:
The Farho heater will be
mechanically secured to the
wall by using the brackets
which have been specially
designed for this purpose
and that are included with
the heater.
FITTING THE RADIATOR
FIG 1
FITTER’S INSTRUCTIONS
