Fargo FARGO DTC 400, User Manual, Page: 98 / 341

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2) 4-38
Flipper Table Module Assembly Problems
Resolving the No Flipper Table Module problem
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer. See the
Flipper Table Module Installation section (as needed).
Step Procedure
1 Review the following information.

Symptom: The Flipper Table Module Assembly is not functioning.

Printer Error State: The Printer is unable to communicate with the Flipper
Module.

LCD Error Display: No Flip Installed

Driver Monitor Error Display: No Flipper Module