Fargo C50, Configuration Manual

Page: 53 / 58

Chapter
7
June 2014 PLT-01277, Version: 1.2
Cleaning
Important:
Clean the printer on a regular basis to ensure that the printer consistently produces high
quality output.
The cleaning described in this section is additional to the information on the
Clean Printer
tab of the
ToolBox.
For detailed information, reference the Cleaning Kit Instruction in the kit.
7.1 Using the Required Supplies
For the maintenance procedures outlined for the printer, you will need a
Printer Cleaning Kit
, available
from the reseller. This optional kit includes the following:
•
Printhead cleaning swabs pre-moistened with 99.99% isopropyl alcohol for cleaning the printer's
printhead.
•
Cleaning cards with an adhesive backing for cleaning the printer's rollers.
• Gauze pads pre-moistened with 99.99% isopropyl alcohol for cleaning the printer's interior and
exterior.
• Alcohol cards pre-moistened with 99.99% isopropyl alcohol for cleaning the printer's platen
rollers, card feed rollers.
NOTE:
As with any electronic device, internal components of the printer, such as the printhead may
be damaged if exposed to static electrical discharges. To avoid potential damage, always wear an
appropriate personal grounding device, such as a wrist strap (with integral resistor) connected to an
ESD ground. At a minimum, make positive contact with the bare metal chassis of the printer with the
hand prior to touching any internal electrical components.
WARNING:
Disconnect the printer's power cord whenever performing any type of
maintenance procedure unless otherwise directed.
AVERTISSEMENT:
Débranchez le cordon d'alimentation de l'imprimante à chaque fois d'effectuer
tout type de procédure de maintenance, sauf indication contraire.