¥
If creating a label for a
CD-R,
set your page size to
4.56Ó x 4.56Ó (116 x 116mm). Although your image will
appear square on screen, the printer driver will
automatically crop your image to the round shape of a
CD-R for printing. The driver will also automatically
crop out the center 1.6Ó (41mm) of your image to
accommodate a CD-RÕs non-printable center hub. If
you would like to better visualize where the round
outside edge and the round non-printable center of a
CD-R will fall in relation to your image, simply draw
one circle with a 4.56Ó (116mm) diameter and another
with a 1.6Ó (41mm) diameter. Then, center both circles
within your active page or canvas area. These circles
will serve as a guide while designing your image. Be
sure to delete these circles before printing.
¥
If creating a label for a jewel case
Booklet,
set your
page size to 4.7Ó x 4.73Ó (119 x 120mm).
¥
If creating a label for a jewel case
Insert,
set your page
size to 4.63Ó x 5.97Ó (118 x 152mm).
3. Once you have created your image and are ready to print,
select
Page Setup
(or the equivalent) from the programÕs
File menu to verify that the printer driver settings are
correct for your image. Be sure the proper Media and Ink
Cartridge options are selected according to the supplies
you have installed in the printer. Once the driver is set,
select
from the programÕs File menu.
4. The printer driver will then begin to process the image.
Depending upon the size of the image and the processing
speed of your computer, processing time can take from
several seconds to a few minutes.
5. Once processing is complete, the printer will begin to print.
Print time will vary depending on whether you are
printing with a color or monochrome cartridge and on
which Print Quality setting you selected. When printing is
complete, the CD Tray will automatically open and remain
fully extended until the next print job is received.
36 Using the CD Color Printer with Macintosh
510225 Fargo/CD Color Prtr 7/29/98 2:39 PM Page 36
