30 Using the CD Color Printer with Macintosh
3.
Select either the
Modem
or
Printer Port
to indicate to
which port the serial interface cable was connected. If the
Printer port is selected, AppleTalk should remain inactive
while printing unless you are using AppleTalk through
your Ethernet port. AppleTalk does not apply when
printing with the Modem port selected.
4.
Select either
On
or
Off
to enable or disable the printerÕs
Background Printing function. When enabled, this function
allows you to work in the foreground of your application
program while printing in the background. Please refer to
Section 5 for more information on background printing.
The next time you open the Chooser, the selected driver will no
longer be highlighted. The Chooser remembers, however,
which driver is the current one but does not display it when
opened.
D. SETTING UP THE PRINTER DRIVER
Once the printer driver has been successfully installed, you will
need to set the driver up with the appropriate print options. To
change or verify your printer driver options, select
Page Setup
from the File menu and change the options as follows:
Media
Click on the Media down arrow. A list of media selections
appears. Select the
CD
option if printing onto printable
CD-RÕs. Select
Booklet
if printing onto a jewel case booklet.
Select
Insert
if printing onto a jewel case insert. When sizing
your images for printing, keep in mind that each type of CD
media has the following maximum printable areas:
CD 4.56Ó round (116mm), Booklet 4.7Ó x 4.73Ó (119 x 120mm),
and Insert 4.63Ó x 5.97Ó (118 x 152mm). For a complete
description of each type of print media and to see how each is
installed, refer to Section 2.
510225 Fargo/CD Color Prtr 7/29/98 2:39 PM Page 30
