FARGO electronics HDP700 Series, Technical Service And Maintenance Manual, Page: 49 / 141

FARGO Electronics Inc.
HDP700 Series Card Printer 3-13
Figure 3-13
Figure 3-14
To define another area, click on the Defined Area up arrow. Another .2" x .2" (5mm x 5mm)
area will appear in the lower left-hand corner. See Figure 3-15. This is the location in which
all newly defined areas will first appear. Up to 5 areas can be defined. Additional areas
cannot be added until the most recently created area has been moved or sized. For this
reason, size and position each area as it is created. Use the Defined Area arrows to navigate
back and forth from area to area. The active area will always be highlighted with a dotted
outline. To delete an area, use the Defined Area arrows to select the area, and click on the
Delete button. If all areas are deleted, the K Panel Resin options will automatically be
deselected.