ENGLISH
8
INSTALLATION
1. Unpack the garment steamer and power cord.
2. Take out the water tank and screw the water tank cover
counterclockwise to add water. Screw cover back on once filled.
3. Take out the support pole and pull out Pole 3 and screw it clockwise
into Pole 4. Then pull out Pole 2 and screw it clockwise into Pole 3.
Lastly, pull out Pole 1 and screw it clockwise into Pole 2.
4. Insert the assembled support pole into the hole on the base until it reaches the
bottom. Screw the bottom of the support pole clockwise to fasten the support pole.
5. Insert the hanger into the top of support pole and screw it to the designed
height. Screw the fixing snap to fasten it. Spread the hanger and screw
the adjusting snap close beneath it to reach a designed range.
6. Insert the hook for ironing brush into the top of the support pole and tighten.
7. Lift down the hood of the connecting hole, take out the ironing brush
and align the plug of the ironing brush with and insert it into the
corresponding hole on the base and tighten by turning clockwise. After
using, please pull out the ironing brush and cover the hood.
8. Hang the ironing brush on the hook.
FILLING WITH WATER
•
To add water, pull the handle on the water tank up to remove. On the
bottom, screw the cap counterclockwise to remove. Fill with water and screw
the cap back on and firmly place the water tank back on the base.
