ENGLISH
5
but only when the machine is cooled down, thus to avoid scald.
27. If the ironing brush falls, has visible damage or is leaking, stop using it.
28. To avoid scald by steam, after operation, turn off the power supply, pull out the
plug and, when the machine is cooled down, pour out the remnant water, and then
have the machine packed and stored. However, let the machine air dried before
packing and storage. Do not pull put the plug by dragging the power cord.
29. Use dry soft cloth and neutral detergent to clean the machine
surface and do not use solvents such as gasoline, alcohol, banana
oil, etc. Prevent liquids penetrating into the machine.
30. Do not soak the machine, power cord or plug in water or other solutions. Do not
keep the machine in places which are damp, exposed or of corrosive gases.
31. Keep the machine away from flammable or explosive objects.
32. Please clean the filter sieve at regular intervals to keep it available. The machine
shall be cleaned or maintained from time to time (every 1 month or 20L water is
consumed). (See the following sections for the cleaning and maintenance)
33. Push the support pole to move the machine. Do not move the machine by force
when it is tough to be moved. Discharge the water before checking the wheels.
Turn off the power supply and pull out the plug before moving the machine.
34. Turn off the power supply and pull out the plug before discharging water from or filling
water in the tank. Avoid water leakage. Do not open or take down the tank in use.
35. If find any damage on the accessories especially the safe protection and
power cord, stop using the machine and inform our professional personnel
of service center for repair. Do not repair at your own discretion.
36. Before cleaning or repairing the machine, turn off the power supply, pull out the plug,
release the pressure inside the heating element of the base and let the machine cool down.
Instructions for the Electrical Cord and Plug
1.
ELECTRICAL SHOCK HAZARD: Failure to follow these instructions
can result in death, fire, or electrical shock.
•
Plug into a grounded 3 prong outlet.
•
DO NOT remove ground prong.
•
DO NOT use an adapter.
•
DO NOT use an extension cord.
2.
This unit MUST be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electric current.
This unit is equipped with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
3.
WARNING: Improper use of the grounding plug can result in a risk of electric
shock.
If the plug does not fit fully into the outlet, contact a qualified
electrician. Do not attempt to modify the plug in any way.
4.
A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
5.
The manufacturer does not recommend using this machine in countries that do not
support 120V AC even if a voltage adapter, transformer, or converter is in use.
SAVE THESE INSTRUCTIONS!