ENGLISH
9
HOW TO OPERATE
1. Place steamer on a flat, level surface. Do not block vents on bottom of unit.
2. Plug in cord and select between the four steam settings. Wait for the steam to come out to
start using - it will take approximately 45 seconds.
NOTE
: Steamer will run for 70 minutes.
3. Put garment onto the hanger head. Grasp the steam head with the steam vents pointing
away from you. Start steaming by touching material lightly with steaming head and
moving in an up/down vertical motion. Begin at the bottom of the garment and move
in an upward direction. Steam with hose in an upright position. If steaming in a low
position near floor, straighten hose up and out frequently to keep clear of condensation.
NOTE
: During operation, the steamer hose may make a gurgling noise.
This is a normal result of condensation. If it begins to gurgle, extend
hose up and out to move excess moisture back into the base.
CLEANING & MAINTENANCE
HELPFUL TIPS
•
Check the fabrics label for recommendations on care. Test fabric for color fastness
on an unobtrusive part of the garment (inner seam) before steaming.
•
Do not touch silk or velvet with steam head. Some articles
can be steamed better from the underside.
•
If steaming in a low position near floor, straighten hose up an out frequently to
keep clear condensation. If hose becomes clogged, it will make a gurgling noise.
•
Heavier fabrics may require repeated steaming.
•
The steamer can be used with regular tap water (up to 12 grains of
hardness). If your water is harder than this, we recommend mixing half
tap water with half distilled water which reduces the hardness; or just
use inexpensive bottled spring water; or 100% distilled water.
•
To better maintain the machine, clean the water tank once a month.
