USE AND MAINTENANCE MANUAL - SECTION 7
STOCK PICKER ELEVAH 51 MOVE
– Rev. 08_2020
Page 7-3
•
Check the wheels for wear
Check there is no debris on the wheels or around them. Check for wear or damage to the tread.
The wheels must be replaced if the edges are worn or the profiles are deformed. If the wheels
have significant damage on tread or sides, immediately assess the severity of the damage before
operating the machine again.
MAINTENANCE EVERY SIX MONTHS
•
Lubrication of moving parts and sliding wheels check
The extensions run on nylon wheels. For each pair of extensions are mounted four wheels, two
upper and two lowers.
Verify the absence of debris, the integrity of the wheels and the absence of games / abnormal
movements
Contact the Manufacturer for further information and instructions regarding the adjustment of
the sliding wheels of the extendable structure, when a backlash anomaly is found.
•
Transmission motor
Check the wear level of the brushes and the manifold.
For any intervention, refer to the appropriate paragraph.
•
Torque Reducer
Eliminate the accumulation of dust greater than 5 mm
Verification of the oil seals and their replacement if considerably used.
MAINTENANCE EVERY TWO YEARS
•
Hydraulic Oil
Change the hydraulic oil in the tank.
Refer to the specifications described in the relative paragraph for information regarding hydraulic
oil change.
MAINTENANCE EVERY FIVE YEARS
•
Torque Reducer
Inspect the reducer and change the synthetic oil.
