USE AND MAINTENANCE MANUAL - SECTION 2
STOCK PICKER ELEVAH 51 MOVE
– Rev. 08_2020
Page 2-4
BASIC CONSTRUCTIVE DATA
MACHINE FRAME:
The frame of the machine (called base) is completely made of aluminium
profiles with rectangular sections. All essential components are installed on the frame for normal
machine operation in stable conditions.
EXTENDING STRUCTURE:
The extending structure is made of special extruded aluminium alloy
profiles that slide along each other on sliding blocks with nylon wheels. The kinematic connection
between profiles is set up using chains.
A fluid power cylinder is installed between the first and second profile that, powered by the hydraulic
control unit, enables to lift the structure. The chains connect the extendible structure elements to
each other so that these can simultaneously lift.
CAGE AND LOADING PLATFORM:
The cage and loading platform are built entirely of extruded
aluminium profiles. The base floors are built with 3 mm thick, non-slip, chequered, aluminium sheet
steel.
EXPOSURE TO VIBRATIONS:
The stock picker does not produce vibrations that place the health
of the operators at risk. The weighted acceleration to which the entire body is subjected is less than
0.5 m/s
2
ACOUSTIC EMISSIONS:
The A-weighted emission sound pressure level is below 70dB
ATTENTION
THE STOCK PICKER ELEVAH 51 MOVE HAS BEEN INSPECTED BY THE MANUFACTURER
FOR THE PURPOSE OF CALCULATING THE MAXIMUM ADMISSIBLE TRANSVERSE AND
LONGITUDINAL ANGLES.
