ENGLISH
ENGLISH
GB-53
GB-52
9. TROUBLESHOOTING TIPS
Start of Dishwasher
The following things should be checked before
starting the dishwasher.
1. The dishwasher is level and fixed properly
2. The inlet valve is open
3. Fill hose connections are fully tightened and
not leaking
4. The wires are tightly connected
5. The power is switched on
6. The inlet and drain hoses are knotted
7. All packing materials and printings should
be taken out from the dishwasher
Attention:
After installation, please make sure to keep
this manual. The content of this manual is very
helpful to the users.
Before Calling for Service
Review the charts on the following pages may
save you from calling for service.
Problem
Possible Causes
What to Do
Technical
problems
Dishwasher
doesn’t start
Fuse blown, or the
circuit breaker acted
Replace fuse or
reset circuit breaker.
Remove any other
appliances sharing
the same circuit with
the dishwasher
Power supply is not
turned on
Make sure the dis-
hwasher is turned on
and the door is closed
securely.
Make sure the power
cord is properly
plugged into the wall
socket.
Water pressure is
low
Check that the water
supply is connected
properly and the
water is turned on.
Door of dishwasher
not properly closed
Make sure to close
the door properly and
latch it.
