Levelling
Place the dishwasher on an even, stable surface.
It is very important that the dishwasher
is perfectly levelled in order to avoid it to
malfunction. You can level the dishwasher by
adjusting the feet at the base of the appliance.
If leaks are detected, immediately shut the water
supply and check the hose connections fully. Re-
tighten the connections if necessary.
If for any reason you are unable to stop the
leak yourself please seek advice from a qualified
plumber.
Your dishwasher cleans by spraying a mixture
of clean water and detergent (under pressure)
against the soiled surface of dishes. The water is
pumped through a rotating spray arm, drained
through a filter removing food and soiled
particles and pumped back through the spray
arm.
Soiled water is pumped out and replaced with clean
water at the end of each cycle (how many times
depends on the cycle being used).
NOTE:
Hard water conditions will adversely affect
washability performance of your dishwasher.
Hard water conditions will also contribute to
“Lime” (white film substance) deposits and/
or “Scaling” on the stainless steel surface of the
dishwasher tub and heater element located in the
sump underneath the removable filter screen.
To minimise these conditions, it is recommended
to periodically operate/rinse the inside of the
dishwasher (empty) using 1 cup of white vinegar
(at least once a week).
OPERATION
GB-11
GB-10
ENGLISH
ENGLISH
