Starting the Dishwasher
1. Turn the water tap on.
2. Open the dishwasher door.
3. Check the filters.
• Ensure they are clean and properly
positioned. See “Cleaning and maintenance”
section.
4. Check that there is rinse aid and salt.
5. Load the dishes.
• Ensure that the spray arms can rotate freely.
6. Add the required amount of detergent into
the dispenser according to the “Washing
Programmes” chart.
7. Close the dishwasher door securely.
8. Press to switch on the dishwasher.
• The Eco programme indicator light will
flash and the washing time will illuminate
on the display.
9. •
Delay timer
: The delay timer allows you to
delay the start of a washing programme by
3 hours, 6 hours or 9 hours.
Repeatedly press
until the desired
start delay time fashes on the display .
Once the delay timer has been set, press
to activate the function .
10. Start the washing programme by pressing
.
11. At the end of the washing programme, the
dishwasher will buzz and automatically stop.
12. Wait for about 15 minutes before you open
the dishwasher door in order to avoid burns.
13. Unload the dishes.
The washing cycle will not start if the
dishwasher door is left open or not properly
closed.
Do not open the door when the dishwasher
is working since hot water may be ejected,
which could cause scalding.
Adding extra crockery
1. Without switching off the appliance, press
to pause.
2. Open the door, taking care to avoid the
escaping steam.
3. Place the crockery inside the dishwasher.
4. Close the door and press
. The cycle
will start from the point at which it was
interrupted.
GB-27
GB-26
ENGLISH
ENGLISH
