ENGLISH
ENGLISH
GB-47
GB-46
8. INSTALLATION INSTRUCTION
always remove the plug from the socket.
•
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive
cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of
the interior, use a cloth dampened with water
and a little vinegar, or a cleaning product made
specifically for dishwashers.
•
When not in Use for a Long Time
It is recommend that you run a wash cycle with
the dishwasher empty and then remove the plug
from the socket, turn off the water supply and
leave the door of the appliance slightly open. This
will help the door seals to last longer and prevent
odours from forming within the appliance.
•
Moving the Appliance
If the appliance must be moved, try to keep it in
the vertical position. If absolutely necessary, it can
be positioned on its back.
•
Seals
One of the factors that cause odours to form in
the dishwasher is food that remains trapped in the
seals. Periodic cleaning with a damp sponge will
prevent this from occurring.
WARNING!
Electrical Shock Hazard Disconnect
electrical power before installing
dishwasher.
Failure to do so can result in death
or electrical shock.
Attention:
The installation of the pipes and electrical
equipment should be done by professionals.
Installation preparation
The installation position of dishwasher should be
near the existing inlet and drain hoses and power
cord.
One side of the cabinet sink should be chosen
to facilitate the connection of drain hoses of the
dishwasher.
Note: please check the accompanying installation
accessories (hook for aesthetic panel, screw)
Positioning the Appliance
Position the appliance in the desired location.
The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or
