Page 9
3
SPEAKER SETUP
All controls, display and connectors are located at the rear of the monitor with the
exception of a front LED that indicates when the speaker is powered ON and that also
signal with various types of blinking the network activity, amplifier limiter in service and
hardware faults.
P
U
S
H
P
U
S
H
N
E
T
W
O
R
K
D
IG
IT
A
L
O
U
T
D
IG
IT
A
L
I
N
A
N
A
L
O
G
I
N
O
U
T
IN
P
O
W
E
R
Figure 3: Monitor rear
3.1
Connectivity
The speaker provides the following connectors:
-
XLR Analogue balanced input
-
RJ45 FAR Link Network input
-
RJ45 FAR Link Network output
-
XLR AES/EBU digital input
-
XLR AES/EBU digital output
The power input is an IEC connector.
3.1.1
Analogue Input
The monitor has a balanced analogue input on a XLR combo plug. The full scale
sensitivity of the analogue input is selectable via the monitor control menu. It can be set
to +3 dBu, +9 dBu, +15 dBu, +21 dBu and +24 dBu.
The standard broadcast full scale input level is +6 dBu with 9 dB headroom. In this case,
the full scale input shall be set to +15 dBu.
The analogue signal is converted to the digital domain by a very high-end converter
(96kHz – 24 bits). It is then treated as the other digital audio streams that can be fed to
the monitor.
