Page 15
3.3.7
EQ Set selection
The EQ Set selector is the 7
th
menu item. The user can select an EQ Set which will
modify the frequency response of the monitor to compensate for room acoustics effects.
There are 7 QE Sets plus the FLAT reference. Each EQ set filters and name can be
modified by the PC Speaker Control Software (SCS). The EQ Set selector does only recall
the stored preset. The factory default for all the 7 EQ Sets is FLAT. The 4 first letters of
the name of the selected EQ set are permanently displayed on the third field of the
bottom line of the LCD.
Figure 15: EQ Set selection parameter and possible values (factory default shown)
3.3.8
Speaker relative level
The speaker volume is the 8
th
menu item. It can range from -10dB to 0 dB by steps of
0.5 dB. The speaker relative level is meant to balance the acoustic power between
multiple speakers in a multi-channel system.
Figure 16: Relative speaker level parameter and values
3.3.9
Relative speaker delay
The speaker volume is the 9
th
menu item. It can range from 0 cm to 150 cm by steps of
5 cm. Speakers relative delay is meant to time align the speakers in a multi-channel
system.
