Page 7
2
PRODUCT DESCRIPTION
The AV10, AV20, AV30 and AV40 monitors are multi-amplified (3 amplifiers in total).
There is one amplifier per driver unit. Refer to chapter 5 [Technical Specifications] for
details.
The 3 ways AV monitors all feature the same medium/tweeter assembly. The medium
driver is optimally loaded and the acoustic load is built in such a way that there cannot
be any destructive interference at the back side of the medium membrane due to wave
reflection inside the volume. This type of construction helps having a flat frequency
response of the medium driver without any significant equalization. It’s a step towards
sound purity and clarity.
This allows a very consistent sound signature across all models.
The plate being square, it is also possible to order the speakers with a medium/tweeter
assembly rotated by 90 degrees.
AV10.D-HL
AV20.D-HL
AV30.D-HL
AV40.D-HL
AV10.D-HR
AV20.D-HR
AV30.D-HR
AV40.D-HR
The box construction is such that the internal resonances are minimal. The internal
structure makes it very stiff though not excessively heavy. This is especially true for the
AV10 and AV20 models.
There is no also such a concept of Master and Slave monitors. All FAR Active monitors
have the same capabilities and features. There are also no special requirements on
power ON and OFF sequences of the monitors. The speakers were designed to be “clicks
and plops” free, in any conditions.
The following figure describes the speaker synoptic.
