REMOTE CONTROLLER
AUTO COOL DRY HEAT FAN
*
Press this button, you can select the running mode as follows:
Note: HEAT mode is not available for cool only units.
10
.
MODE
11
.
SLEEP
*
Press this button to enter SLEEP mode, which the unit will
exit after 10 hours of continuous operation and restore to the
previous status.
Note:The SLEEP function cannot be activated in FAN mode.
12
.
SWING
*
to fix the swing position.
Press this button to activate up/down swing and press it again
13
.
SWING
This button has no function.
9
.
TURBO
*
on or off to speedy the cooling or heating.
*
When TURBO is on, the air speed is HIGH.
*
When TURBO is off, the air speed will restore to previous
status.
Press this button only in COOL or HEAT mode to set TURBO
60
This unit must be installed by a professional according: RD 795/2010, RD 1027/2007 and RD 238/213.
