90
Picture 27 - Security settings
Set on the web side
Users can set security mode, select input port and trigger mode in [
Web
] > > [
Security
Settings
] > > [
Input Settings
].
Please refer to for specific parameter descriptions
Picture 28 - Web configuration
8.6.2
Zone setting
In the set zone mode, the user uses the equipment to monitor and manage the zone. When the
set type trigger occurs, the device can alarm according to the set trigger mode and alarm type.
In the standby interface, the user selects [
Device Settings
] > > [
Advanced
], and the input box
for entering the advanced setting password pops up. After entering the password correctly (admin
by default), enter the advanced interface, and then select [
Security
] to enter the defense zone
